vendo a 45€ cada uno + envio.
Si te quedas todos los envio a peninsula gratis.
Whatsapp : 660 35 35 27
Descripcion de los servos.
MKS HV-787 Titanium Gear High Speed Digital High-Voltage Servo w/ Alloy Upper Case (0.33 sec/8.44kg-cm)
Ideal to use for CCPM servos on Align T-Rex 600/700, CompassModel 6HV/7HV and other 90-class helicopters.
This is the MKS HV-787 Titanium Gear High Speed Digital Cyclic Servo. The HV-787 servo is recommended for high speed 450-500 class helicopter cyclic applications. MKS High Voltage Servo's are lightning fast, extremely strong and operate with little noise. MKS HV servos feature exclusive low current draw motors with overload protection that have been developed exclusively for high voltage applications, as well as an aluminum upper case for the ultimate in durability and rigidity. The result is a servo that provides ultra fast response, with exceptional agility and astonishing performance.
Specs:
Dead band: 0.0008 ms (Default)
Control System: +Pulse Width Control
Working frequency: 1520μs / 333hz
(RX) Required Pulse: 3.5 ~7.4 Volt Peak to Peak Square Wave
Operating Voltage: 6.0 ~7.4 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (6.0V): 0.041 sec/60° degrees at no load
Operating Speed (7.4V): 0.033 sec/60° degrees at no load
Stall Torque (6.0V): 95.1 oz/in (6.85 kg.cm)
Stall Torque (7.4V): 117.2 oz/in (8.44 kg.cm)
360° Modifiable: NO
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO
Connector Wire Length: 15.0cm (5.9")
Dimensions: 40x20x43mm (1.57x0.97x1.69")
Weight: 79.5g (2.8 oz)
Adjunto:
- 001.jpg (165.31 KiB) Visto 7404 veces
Adjunto:
- 002.jpg (99.08 KiB) Visto 7404 veces
Adjunto:
- 003.jpg (144.08 KiB) Visto 7404 veces
Adjunto:
- 004.jpg (97.46 KiB) Visto 7404 veces
